Geeetech Peek J-head V2.0 hotend for 3d printer extruder with cable 0.3/0.35/0.4/0.5mm for 1.75/3mm filament free shipping
|45 days Money back Returns accepted if product not as described, buyer pays return shipping; or keep the product & agree refund with seller.|
Guarantees: On-time Delivery 60 days
This J-head V2.0 hotend is a combination of ideas from other nozzle designs combined with a goal to reduce the number of custom machined parts to a bare minimum. The J-Head V2.0 has been proven to print reliably with both ABS and PLA. PLA will require a small fan to provide air-flow through the cooling vents milled in the sides of the nozzle holder. This hot-end easily interfaces with the most popular RepRap extruders, including Wade’s Extuder, Greg Frost’s Hinged Accessible Extruder, etc. Features: The J-head is assembled with 100K NTC thermistor and Cartridge heater,NOT heat resistor.Check the following specifications for the assembled heater. Materail: Stainless Steel,PVC,Nylon Voltage: 12V Power: 30w Wire Length :1m Heater size: 6 x 15mm(D*L) High-quality PEEK heat-insulated pipe. Duralumin alloy nozzle. Small size, light weight. The PTFE is not stressed nor used to provide support. This reduces a point of failure that is part of other designs. A resistor is used as a heater. There is no need to wrap nichrome wire or to bake a heater core. The entrance is located at the PEEK tube inner side, which is more preferable for the implementation of the short-range extruders. Package list: 1 x Geeetech Peek J-head V2.0 with Cartridge heater Nozzle diameter: 0.3mm,0.35mm,0.4mm, 0.5mm optional. Feed inlet diameter : 1.75mm 3mm diameter PLA optional. Please leave us your message about which Nozzle diameter and Feed inlet diameter size you need when you order. Otherwise we will ship the 0.3mm Nozzle and 1.75mm Feed inlet diameter as default
0 out of 5 (0 Ratings)
|Positive (0 %)||
4 Stars (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
ultimaker 2/2 Extended print head kit full extruder kit for DIY ultimaker 3D printer complete extrusion 0.4mm nozzle 1.75mm
RAMPS 1.4 RAMPS 1.4 Reprap 3D printer
Hotsale Geeetech 3D Printer Hobbed Bolt M8 for Extruder filament nozzle excellent driving force
1 set 3D printer MK8 / MK9 extruder 1.75mm wire feed device kits ( right and left side ) for Makerbot
MK8 Dual extruder holder 3D printer accessories
US $9.98 / piece
1PCS Reprap Prusa i3 3D Printer Nozzle Mixed Sizes 0.2mm/0.3mm/0.4mm Extruder Print Head for MK8 Extruder 1.75mm ABS PLA Printer
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.